HOT-LINE
EMX-16012 Solar street lamp control panel
Name EMX-16012 Solar Street Lamp Control Panel
1.5W and 5. 5W monocrystalline silicon solar chargers are adopted
|
No. |
Function description and scope of application |
|
1 |
1.5W and 5.5W monocrystalline silicon solar chargers are adopted. |
|
2 |
The battery voltage is 3.7V (single lithium battery) |
|
3 |
It has the light control function, and automatically turns on the LED lamp at night. |
|
4 |
Adjustable brightness: total power mode and half-power mode. |
|
5 |
It has complete intelligent MCU control and is applied to the outdoor solar street lamp charging. |
|
6 |
Lithium battery protection function: Over-charge, over-discharge and short-circuit protection |
| Size | 69mm*26mm*20mm |
Main Parameters
|
2. Key function |
||
|
Long press for 3s in standby state. |
Start up by flickering twice and enter Mode 1. |
When the sunlight is unavailable, enter low bright mode (until the non-timing battery is run out). |
|
Press the key in Mode 1. |
Flicker twice and enter Mode 2. |
When the sunlight is unavailable, enter highlight mode (until the non-timing battery is run out). |
|
Press the key in Mode 3. |
Enter the standby mode, without flickering. |
Enter the standby mode. The headlamp is off when lighting by day and at night. |
|
3. Others |
||
|
3.1 Lithium battery protection function |
Pure hardware protection of lithium battery circuit |
|
|
5.2 Quiescent dissipation of complete machine |
<100uA |
|
Description
Phone：0755-27648994
FAX：0755-33669510
Add：
No. 02-06, Floor 11, Block B, No. 196 Tangtou Avenue,
Shixin Community, Shiyan Street, Bao'an District, Shenzhen City
Mobile website
