HOT-LINE
EMX-17021 Solar charging street lamp control panel
Name EMX-17021 Solar Charge Steet lamp ControlPanel
Body inductin, ifrared remote control
|
No. |
Function description and scope of application |
|
1 |
2.5W and 5.5W monocrystalline silicon solar chargers are adopted. |
|
2 |
The battery voltage is 3.7V (two single parallel lithium batteries) |
|
3 |
The body induction distance is 6M. |
|
4 |
Remote control distance: Greater than 8M. |
|
5 |
Function of remote control: Mode conversion, brilliance control, and Startup & Shutdown |
|
6 |
Lithium battery protection function: Over-charge, over-discharge and short-circuit protection |
| Size | 53mm*30mm*20mm |
| Characteristics | Body induction, infrared remote control |
Main Parameters
|
Function |
||
|
Long press for 3s in standby state. |
Start up by flickering twice and enter Mode 1. |
Body induction +slightly bright mode: When the sunlight is unavailable, highlight for 20s after the body induction, and then, enter low bright mode. |
|
Press the key in Mode 1. |
Flicker twice and enter Mode 2. |
Body induction mode: When the sunlight is unavailable, highlight for 20s after the body induction, and then, turn off the light. |
|
Press the key in Mode 2. |
Flicker twice and enter Mode 3. |
Slightly bright for 300min when the sunlight is unavailable. |
|
Press the key in Mode 3. |
Directly shut down, without flickering. |
Enter the standby mode. |
|
Parameters of protective circuit |
||
|
Over-charge protection voltage |
4.300 +/-0.050V |
|
|
Over-discharge protection voltage |
2.4V +/-0.10V |
|
|
Maximum current output |
3A +/- 1A |
|
|
Quiescent current of protective circuit |
< 5 uA |
|
|
Function of remote control |
||
|
Startup key |
Press it to start up, and enter Mode 1; |
|
|
Shutdown key |
Press it to shut down. |
|
|
Mode increase key |
The key is invalid after Mode 3 from Mode 1-Mode 2-Mode 3. |
|
|
Mode decrease key |
The key is invalid after Mode 1 from Mode 3-Mode 2-Mode 1. |
|
|
Brightness increase key |
Press it to increase the brightness, loosen it and keep the current brightness in the current mode, and press it invalidly when increasing to be brightest. |
|
|
Brightness decrease key |
Press it to decrease the brightness, loosen it and keep the current brightness in the current mode, and press it invalidly when decreasing to the minimum brightness. |
|
|
Others |
||
|
Lithium battery protection function |
Refer to the test method of protective plate |
|
|
PIR induction angle |
120° |
|
|
5.3 Quiescent dissipation of complete machine |
300uA |
|
|
5.4 Battery capacity |
( 2000mAH *2 ) |
|
|
5.5 Maximum current in highlight mode |
700mA |
Have a big relation with the battery voltage. |
|
5.6 Current in normally highlight mode |
200mA |
|
|
5.5 Current in the slightly bright mode |
30mA |
|
Description
Phone：0755-27648994
FAX：0755-33669510
Add：
No. 02-06, Floor 11, Block B, No. 196 Tangtou Avenue,
Shixin Community, Shiyan Street, Bao'an District, Shenzhen City
Mobile website
